Complete Hardware & Software Stack

Your PC.
Everywhere you go.

Turn your desktop into a personal cloud powerhouse. Stream games at 120 FPS, wake sleeping hardware remotely, and eliminate router port forwarding with an encrypted WireGuard mesh.

Start the GuideView Roadmap (7 Steps)
✓ Zero Port Forwarding✓ <15ms Glass Latency✓ Physical HW Fail-Safe
Architecture Overview

The Connected Mesh

🛰️
Mesh Security
Tailscale WireGuard
P2P Ready
🔔
Remote Wake
Magic Packet via Subnet
Enabled
🎮
Stream Engine
Sunshine / Apollo + Moonlight
120 FPS HDR
⚡
Hardware Fallback
ESP32 Servo Actuator
Standby
Step-by-Step Path

Complete 4-Stage Setup Guide

Follow each step sequentially. Every phase builds upon the previous one to deliver seamless remote productivity and cloud gaming.

🛰️

1. Secure Network Mesh

Establish an encrypted, zero-config WireGuard mesh between all your devices with no port forwarding.

2 Steps
Step 01Network

Create a Tailscale Account

Set up your Tailscale account to establish a secure mesh VPN.

Read guide
Step 02Network

Install Tailscale on Host & Clients

Install Tailscale on your PC and every device you'll connect from.

Read guide
🔔

2. Subnet Routing & Wake-on-LAN

Reach local network devices and wake your PC from sleep or shutdown over the internet.

2 Steps
Step 03Routing

Add a Subnet Node (Pi / Old Phone)

Route local network access through a lightweight always-on device.

Read guide
Step 04Routing

Configure Wake-on-LAN (WoL)

Wake your PC remotely before starting a session.

Read guide
🎮

3. Ultra-Low Latency Streaming

Stream your PC games and desktop at 120+ FPS with virtual display drivers and HDR encoding.

2 Steps
Step 05Streaming

Configure Sunshine / Apollo (Host)

Set up the low-latency encoding host on your PC.

Read guide
Step 06Streaming

Set Up Moonlight on Your Clients

Install the client app and pair it to your host for remote streaming.

Read guide
⚡

4. Physical Hardware Fail-Safe

A dedicated microcontroller actuator to physically press the power button when software methods fail.

1 Step
Step 07Hardware fallback

DIY ESP32 SwitchBot Setup

Hardware-level remote power button for when Wake-on-LAN fails.

Read guide